+7 (495) 640 45 45
Professional stage equipment
Professional stage equipment

Couplers and baseplates

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 1,860
Article: BASE-36R
The steel baseplates are standard available in a round version as well as a square version. The plates are suited for all 30- and 40 series truss in triangular, square and rectangular shapes. Each plate has two reinforced grips, which makes them easier to handle. The baseplates are standard available in a black-coated version or a galvanized version. Each plate is delivered including 4 male receivers (CCS6-602) and 4 countersunk bolts (BM-M12x030-IB CS) to connect them to the plate.
Weight, kg: 49
Article: BASE-30-40-SS-BC
Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.
Weight, kg: 0,040
Article: CCS6-604
The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,148
Article: CCS6-600
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 1,860
Article: BASE-30V
The steel baseplates are standard available in a round version as well as a square version. The plates are suited for all 30- and 40 series truss in triangular, square and rectangular shapes. Each plate has two reinforced grips, which makes them easier to handle. The baseplates are standard available in a black-coated version or a galvanized version. Each plate is delivered including 4 male receivers (CCS6-602) and 4 countersunk bolts (BM-M12x030-IB CS) to connect them to the plate.
Weight, kg: 38
Article: BASE-30-40-RS-BC
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 2,700
Article: BASE-52V
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Weight, kg: 1,160
Article: BASE-30D
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 2,820
Article: BASE-40V
The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,065
Article: CCS4-451
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 2,700
Article: BASE-40D
The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,050
Article: CCS4-402
The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,017
Article: CCS4-403
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Article: BASE-20L
The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,058
Article: CCS4-400
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 1,160
Article: BASE-36V
The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.
Weight, kg: 0,280
Article: CCS6-651
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 1,170
Article: BASE-20V
Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.
Weight, kg: 0,740
Article: BASE-20D
Spacers are used to add or overcome a small size difference in your truss construction. Spacers can also be used to pre-tension larger truss spans.
Article: CCS4-S10
Per: 20